Description
Type S – Bushing Full Length Sizing Die & Competition Seating Die
Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S – Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
-
Uses the same interchangeable bushings (.001″ increments) as those used in our bushing style neck sizing dies.
-
The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desire d .
-
Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
-
All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S – Bushing Style Neck Sizing Dies.
Note: By removing the bushing and all internal parts, the Type-S full bushing die may also be used as a body die.
Set Contains: Type S – Match Bushing Full Length Sizing Die & Competition Seating Die
All dies are supplied without bushings.
Agency Tourism Marketing